5
List of Materials
Removing the packaging
CAUTION!
Remove carton carefully, wear gloves to protect against sharp edges.
WARNING!
Remove the protective lm covering the product before putting into
operation.
Parts supplied
• Hood assembly with blower and light bulbs
• 8” Metalic Air Transition
• Duct covers
• Metal grease lters
• Hardware bag with:
• Use, care and installation guide
• Duct cover bracket
• T20 TORX®† adapter
• 6 - 5 x 45 mm mounting screws
• 4 - 3.5 x 9.5 mm mounting screws
• 4 - 4.2 x 8 mm mounting screws
• 2 - 8 x 40 mm wall anchors
• 4 - 10 x 50 mm wall anchors
Product Dimensions
Parts needed
• Home power supply cable
• ½” (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
• 1 wall or roof cap
• 8” round metal vent system
Tools/Materials required
• Level
• Drill with 1¼” (3.2 cm),⅛” (3.2 mm), and
5
⁄16” (7.9 mm) drill bits
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Vent clamps
• Jigsaw or keyhole saw
• Flat-blade screwdriver
• Metal snips
8”
(20.32 cm)
10
5
⁄8”
(26.9 cm)
13”
(33.2 cm)
Max 52” (132 cm)
Min 37
1
⁄2” (95.3 cm)
12
1
⁄8”
(30.8 cm)
24”
(61 cm)
30” (75.7 cm)
36” (91 cm)
42” (106.2 cm)
Commentaires sur ces manuels