ELICA ESL636S2 Manuel d'utilisateur télécharger pdf (Page 10)

Connecting the ductwork

Install ductwork, making connections in the direction of

airflow as illustrated.

Push duct over the exhaust outlet.

Wrap all duct joints and the flange connections with duct

tape for an airtight seal.

Make the same connection in the wall or ceiling vent

exit.

Electrical connection

WARNING

Electrical Shock Hazard

Warning: Turn off power circuit at the service panel

before wiring this unit.

120 VAC, 15 or 20 Amp circuit required.

ELECTRICAL GROUNDING INSTRUCTIONS

THIS APPLIANCE IS FITTED WITH AN ELECTRICAL

JUNCTION BOX WITH 3 WIRES, ONE OF WHICH

(GREEN/YELLOW) SERVES TO GROUND THE

APPLIANCE. TO PROTECT YOU AGAINST

ELECTRIC SHOCK, THE GREEN AND YELLOW WIRE

MUST BE CONNECTED TO THE GROUNDING WIRE

IN YOUR HOME ELECTRICAL SYSTEM, AND IT

MUST UNDER NO CIRCUMSTANCES BE CUT OR

REMOVED.

Failure to do so can result in death or electrical

shock.

Facing the front of the range hood, remove the left

knockout and the Junction box cover and install the

conduit connector (cULus listed) in junction box.

If not already done, install 1/2” conduit connector in j-

box.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 18 19

Pas de commentaire

ELICA ESL636S2 Manuel d'utilisateur Page 10